Showing posts with label Grounding. Show all posts
Showing posts with label Grounding. Show all posts

Saturday, 15 December 2018

Info!! Reducing Switching Ability Furnish Radiated & Conducted Emi


One application trial that comes across my desk on a regular soil is where a client has gone to an exterior lab to certify their equipment for EMC, in addition to they guide hold failed conducted or radiated noise.

Usually the ability render inward interrogation is an opened upwards frame type, which does non guide hold the shielding that a metallic enclosed ability render has.  There are 2 areas that are worth checking; grounding points in addition to wire harnesses.

1. Grounding Points

Power supplies utilize decoupling capacitors; 2 are typically connected from input to the world terra firma (see below). Likewise, 2 are connected from the output to the world ground. This keeps the racket currents circulating unopen to the ability supply, rather than allowing them to radiate some the cease user’s system.
 
In an enclosed ability render these capacitors volition move grounded through the metallic case, exactly amongst an opened upwards frame type, it is upwards to the user to connect these points to ground.  With the ability density of products today, at that topographic point oftentimes is to a greater extent than than 1 betoken on the ability render printed circuit board that needs to move connected.  A mutual error is to entirely connect one, which tin campaign excessive radiated in addition to conducted noise.

The installation manual volition demonstrate which mounting holes / points ask to move grounded.  In the production below, iii mounts should move connected (A, B & C).


 
 
The photograph below shows the same ability render undergoing EMC testing, in addition to it tin move noted that the unit of measurement is connected to a metallic plate amongst metallic standoffs.


 
 
A quick glance of the underside of the printed circuit board volition demonstrate which mounting holes guide hold traces that ask to move grounded. This smaller model has entirely 1 grounding betoken at the bottom correct manus side of the board.

2. Wiring harnesses

In the exam photo, it tin move seen that the cable harnesses are neatly dressed in addition to are kept away from the ability supply.  Wiring that is positioned higher upwards or below the unit of measurement volition option upwards radiated noise, therefore defeating the role of having the EMI filter components.

If I am assisting customers on site, I ever pack some tie-wraps inward my tool kit to re-route whatever offending harnesses.

An before spider web log covers the standards /search?q=guide-to-emc-standards-for-power

 

Info!! Put Down Continuity & Put Down Bonding Tests On Ability Supplies

I heard to a greater extent than or less news on this dependent champaign inwards our facility recently, too idea it would brand a expert weblog article.
The security bodies (UL, CSA, IEC etc.) involve that electrical too electronic products are suitably protected too tested; to ensure the user does non piece of work an electrical daze that could hurt or fifty-fifty kill.

One of the areas of work organization is the grounding (earth) of the product, too the next tests are conducted; non but during production security certification testing, but likewise inwards production.  This is mandated on all products alongside a pluggable ability cord.
Ground Continuity
The basis continuity exam verifies the connexion betwixt the basis pivot on the ability cord too whatever exposed metallic parts on the equipment.  An air conditioning or DC voltage tin live on used, too the electrical current is typically quite low, less than 1A.  A uncomplicated handheld device tin live on used for testing

Ground Bonding
Unlike the continuity test, the bonding checks the integrity of the grounding.  This is typically measured using a 25 or 30A electrical current (depending upon the rating of product’s internal air conditioning fuse or branch circuit) simulating an actual internal fault.  The applied voltage is less than 12V too the maximum resistance betwixt the globe too exposed metallic surfaces is 0.1 ohm. The resistance tin live on determined past times mensuration the voltage drop.  Depending upon the security way requirements, this exam is performed for threescore to 120 seconds.
Using a higher electrical current than the continuity exam ensures that whatever hardware inwards the basis path is fully tightened, whatever wire joints are properly crimped, too whatever printed wiring board traces are real capable of treatment the current.  The fuse or breaker should opened upwards earlier a loss of the basis connection.
There are a pose out of commercially available testers on the marketplace than tin live on programmed for production use.
If you lot blueprint your ain tester at that topographic point are 2 things you lot should note:
  1. Make certain that you lot produce non include the cable drops when mensuration the voltage (have the meter read at the connexion points)
  2. Apply the exam probes when at that topographic point is no ability applied; otherwise the resulting spark tin score the metallic parts too harm the plating.
As a banknote basis bonding may live on likewise live on referred to equally globe bonding.
Power Guy

Thursday, 13 December 2018

Info!! Reducing Switching Ability Furnish Radiated & Conducted Emi


One application trial that comes across my desk on a regular soil is where a client has gone to an exterior lab to certify their equipment for EMC, in addition to they guide hold failed conducted or radiated noise.

Usually the ability render inward interrogation is an opened upwards frame type, which does non guide hold the shielding that a metallic enclosed ability render has.  There are 2 areas that are worth checking; grounding points in addition to wire harnesses.

1. Grounding Points

Power supplies utilize decoupling capacitors; 2 are typically connected from input to the world terra firma (see below). Likewise, 2 are connected from the output to the world ground. This keeps the racket currents circulating unopen to the ability supply, rather than allowing them to radiate some the cease user’s system.
 
In an enclosed ability render these capacitors volition move grounded through the metallic case, exactly amongst an opened upwards frame type, it is upwards to the user to connect these points to ground.  With the ability density of products today, at that topographic point oftentimes is to a greater extent than than 1 betoken on the ability render printed circuit board that needs to move connected.  A mutual error is to entirely connect one, which tin campaign excessive radiated in addition to conducted noise.

The installation manual volition demonstrate which mounting holes / points ask to move grounded.  In the production below, iii mounts should move connected (A, B & C).


 
 
The photograph below shows the same ability render undergoing EMC testing, in addition to it tin move noted that the unit of measurement is connected to a metallic plate amongst metallic standoffs.


 
 
A quick glance of the underside of the printed circuit board volition demonstrate which mounting holes guide hold traces that ask to move grounded. This smaller model has entirely 1 grounding betoken at the bottom correct manus side of the board.

2. Wiring harnesses

In the exam photo, it tin move seen that the cable harnesses are neatly dressed in addition to are kept away from the ability supply.  Wiring that is positioned higher upwards or below the unit of measurement volition option upwards radiated noise, therefore defeating the role of having the EMI filter components.

If I am assisting customers on site, I ever pack some tie-wraps inward my tool kit to re-route whatever offending harnesses.

An before spider web log covers the standards /search?q=guide-to-emc-standards-for-power

 

Info!! Put Down Continuity & Put Down Bonding Tests On Ability Supplies

I heard to a greater extent than or less news on this dependent champaign inwards our facility recently, too idea it would brand a expert weblog article.
The security bodies (UL, CSA, IEC etc.) involve that electrical too electronic products are suitably protected too tested; to ensure the user does non piece of work an electrical daze that could hurt or fifty-fifty kill.

One of the areas of work organization is the grounding (earth) of the product, too the next tests are conducted; non but during production security certification testing, but likewise inwards production.  This is mandated on all products alongside a pluggable ability cord.
Ground Continuity
The basis continuity exam verifies the connexion betwixt the basis pivot on the ability cord too whatever exposed metallic parts on the equipment.  An air conditioning or DC voltage tin live on used, too the electrical current is typically quite low, less than 1A.  A uncomplicated handheld device tin live on used for testing

Ground Bonding
Unlike the continuity test, the bonding checks the integrity of the grounding.  This is typically measured using a 25 or 30A electrical current (depending upon the rating of product’s internal air conditioning fuse or branch circuit) simulating an actual internal fault.  The applied voltage is less than 12V too the maximum resistance betwixt the globe too exposed metallic surfaces is 0.1 ohm. The resistance tin live on determined past times mensuration the voltage drop.  Depending upon the security way requirements, this exam is performed for threescore to 120 seconds.
Using a higher electrical current than the continuity exam ensures that whatever hardware inwards the basis path is fully tightened, whatever wire joints are properly crimped, too whatever printed wiring board traces are real capable of treatment the current.  The fuse or breaker should opened upwards earlier a loss of the basis connection.
There are a pose out of commercially available testers on the marketplace than tin live on programmed for production use.
If you lot blueprint your ain tester at that topographic point are 2 things you lot should note:
  1. Make certain that you lot produce non include the cable drops when mensuration the voltage (have the meter read at the connexion points)
  2. Apply the exam probes when at that topographic point is no ability applied; otherwise the resulting spark tin score the metallic parts too harm the plating.
As a banknote basis bonding may live on likewise live on referred to equally globe bonding.
Power Guy