Showing posts with label Regulation. Show all posts
Showing posts with label Regulation. Show all posts

Monday, 17 December 2018

Info!! Minimum Loads In Addition To Cross-Regulation On Multiple Output Ability Supplies

One bailiwick that our Technical Support squad oftentimes gets asked most is minimum loads on multiple output ability supplies, thus I idea this would hold upwards a practiced bailiwick to write about.


On a depression cost, depression power, multiple output ability supply, the datasheet volition often acre that to hold regulation, a minimum charge has to hold upwards applied to i or to a greater extent than of the outputs.

To explicate why, hither is a block diagram of i such unproblematic triple output ability supply.


On the middle right mitt side of the diagram are the 3 output windings from the transformer.

On Channel 1 (+5V), the output from the transformer is rectified as well as filtered to provide a smooth, DC output. If that output voltage is non at the fix voltage, tell due to a charge change, the ability render volition automatically right itself. It does this past times sensing the output voltage, comparison it to an internal reference, as well as feeding dorsum a indicate to the command circuit via the opto-coupler. The command circuit volition as well as thus adapt the pulse width of the converter accordingly. The rule on this output is typically 1 to 2%.

On Channels 2 & 3 (+V as well as –V) though, it tin dismiss hold upwards seen that in that place is no feed dorsum to the command circuit. These outputs are referred to equally “semi-regulated”. If Channel 2’s charge were to growth for example, the output would drib slightly, but in that place would non hold upwards whatever automatic correction. That voltage drib is specified past times the charge rule specification, typically 3 to 5%.

With honor to minimum loading, if in that place is piffling or no charge on Channel 1, the output volition nonetheless hold upwards at the fix voltage, but the switching converter pulse width volition hold upwards really narrow. The output voltage on Channels 2 & 3 drops fairly dramatically at those narrow pulse widths, peculiarly if the outputs are supplying their total rated load. An output voltage of 12V may drib to 8V.

Conversely, if the total rated charge is applied to Channel 1, but Channels 2 & 3 are non loaded, the voltages on 2 & 3 volition rise, as well as a 12V output could deliver over 14V.

The termination that varying loads on Channel 1 has on the “semi-regulated,” Channels 2 & 3, is many times referred to equally the “cross regulation” specification.

Manufacturers of ability supplies specify a minimum charge requirement on Channel 1, usually 10%, to warn the user. Minimum loads may besides hold upwards specified on Channels 2 & 3 to promote a improve rule specification.

Operating without a minimum charge volition non unremarkably crusade a ability render to fail, but tin dismiss stress the user’s equipment.

Some products similar TDK-Lambda’s MTW serial employ ii converters to improve ability render regulation, i to render Channel 1 & i to render Channels 2 & 3. Note that both V2 as well as V3 are sensed past times the command circuit.
Fig. 2: Two converters (click to enlarge image)


Here is a link for to a greater extent than details most the MTW series: http://www.us.tdk-lambda.com/lp/products/mtw-series.htm

Other products similar the NV175 serial employ post regulators on each output, completely eliminating the minimum charge requirement. Although this does add together terms to the ability supply, it removes whatever trace of piece of job concern for the user as well as helps amongst organization flexibility. Here is a link to the datasheet for NV175 series: http://www.us.tdk-lambda.com/lp/ftp/Specs/nv175.pdf

Saturday, 15 December 2018

Info!! Ability Render Remote Feel Mistakes In Addition To Remedies

Most medium to high ability AC-DC ability supplies as well as some DC-DC converters include "Remote Sense" connectedness points (+ as well as - Sense) that are used to tightly regulate the supply's output voltage at the load. Since the output cables that connect a ability supply's output to its charge receive got some resistance, every bit electrical flow period of time increases, then volition the voltage drib across the cables (I x R = Voltage Drop). Moreover, since it's best to regulate the voltage straight at the load, the utilisation of the ii Remote Sense wires connected from the render to the charge volition compensate for these unwanted voltage drops. Refer to Fig. 1 which shows the typical connections when the Remote Sense role is used.

Fig. 1: Power Supply amongst Twisted "Remote Sense" Wires Connected to the Load

Typical "Remote Sense" Problems & Remedies
  1. Most remote sensing circuits are capable of compensating for from 0.25V to 0.75V of voltage-drops across the output cables. However, to move sure, e'er cheque your ability supply's pedagogy manual to decide its maximum remote feel compensating range. If the voltage drib across the output cables exceeds the compensating hit of the remote feel circuits, the voltage at the charge volition no longer move regulated. This occupation tin laissez passer notice move remedied past times either reducing the length of the output cables or increasing the size (heavier wire gauge) of the output cable's to trim back the excessive voltage drop. Voltage drops across the output cables should move minimized since this is a beginning of wasted power. For example, amongst only a 0.5V cable drib amongst a 100A load, the lost ability amounts to 50W inwards each cable or 100W total.
  2. The remote feel role automatically increases the output voltage at the output terminals of the render to compensate for whatsoever unwanted voltage drib inwards the output cables amongst heavy charge currents. Likewise, the remote feel role decreases the output voltage of the render when the required charge electrical flow is reduced. In some applications, the ability supply's output needs to move adjusted past times the user to voltage higher than its nominal (e.g. 5V nominal, adjusted to 5.5V). Always conform the ability supply's output spell criterion the voltage at the load. In addition, tending should move taken to assure that nether total charge that the remote feel role does non force the Vout to a higher voltage that could perhaps trip the OVP set-point as well as shutdown the supply. Therefore, e'er read the ability supply's pedagogy manual to move aware of the supply's adjustment hit as well as OVP set-point.
  3. The remote feel leads bear really picayune electrical flow then low-cal approximate wires tin laissez passer notice move used. However, steps should move taken to ensure that the remote feel wires create non alternative upwards radiated noise past times either twisting the + as well as - Sense wires together and/or past times shielding the wires from the noise (refer to Fig 1). It is best to utilisation dissimilar colored feel wires (e.g., dark as well as red) then that subsequently they are twisted it is slow to decide which wire is the + as well as – Sense.
  4. Refer to Fig. 2 below for a simplified schematic of a ability supply's remote feel circuits. It is of import to detect the right polarities, i.e., the +Sense wire should connect at the charge almost the +Vload connectedness as well as the –Sense wire should connect at the charge almost to the – Vload connection. If past times error the remote feel wires are crossed-connected (+Sense to –Vload as well as – Sense to +Vload) electrical flow volition period of time inwards the Sense lines as well as burn downward out the internal Rsense resistors, causing a malfunction of the supply. Typically, these internal Rsense resistors are unopen to 10 to 100 Ohms amongst a maximum rating of 0.5W.
Fig. 2: Simplified Schematic of Remote Sense Circuit amongst External Output & Sense Wires

  1. We receive got seen applications where the user has installed a switch or fuse inwards serial amongst i or both output wires. This tin laissez passer notice travail a serious occupation if the remote feel lines rest connected to the load, because if the output cable switch or fuse opens, electrical flow volition period of time inwards the feel lines as well as travail the internal Rsense resistors to burn downward up. System debugging tin laissez passer notice travail like problems, for example, where the ability as well as feel cables are located on split connectors as well as if past times error, solely the ability cable connector is disconnected. 
  2. There are applications where the user may non desire to utilisation the remote feel feature. In these cases, the remote feel lines should non move left opened upwards for optimum charge regulation; instead, a local feel configuration must move used. Referring to Fig. 3, to utilisation a local feel fix the + as well as -Sense lines should move connected to either their corresponding local feel (LS) terminals, which are provided on many ability supplies, or connected to the corresponding +Vout as well as –Vout terminals. Most ability supplies are shipped from the manufacturing industrial plant life amongst these "Local Sense" jumpers installed on the ability render (see photos below).
Fig. 3: Schematic of Power Supply amongst "Local Sense" Jumpers Installed

Photo of Power Supply amongst Local Sense Wires Connected (see Red & Black jumper wires)

Photo of PSU amongst Sense Screw Terminals Connected to Output Screw Terminals amongst Metal Jumpers
In summary, the "Remote Sense" characteristic automatically compensates for unwanted output cable drops, which vary every bit the output electrical flow increases as well as decreases. This characteristic is advantageous to the user, but is dependent champaign to mistakes that should move avoided to insure the proper functioning of the ability render as well as the end-product.

Friday, 14 December 2018

Info!! External Ability Provide Efficiency Standards

Note: As the final European Union implementation appointment has slipped, this is the electrical flow province of affairs every bit of August 24, 2018.  Influenza A virus subtype H5N1 draft European Union amendment dated 2018 indicates that the legislation may mirror to a greater extent than closely the DoE Level VI limits effective April, 2020.

External ability supplies (EPS) are widely used inwards households around the globe to accuse phones or run tablets, laptops, game consoles as well as a multifariousness of consumer electronic as well as electrical items.

Studies on European release energy purpose of these ability supplies signal that reducing off-load ability consumption as well as improving production efficiency volition salve around 10TWh of ability a year.  Influenza A virus subtype H5N1 Terawatt hr (TWh) is 1,000,000,000,000 Watts used inwards an hour.  Reducing release energy usage saves money, reduces the requirement to add together novel ability generating capacity as well as reduces environmental pollution.

Two parameters were originally specified to regulate waste matter release energy reduction, which when multiplied yesteryear a billion products becomes really significant:

Maximum off-load ability consumption

Many ability supplies are left plugged inwards to the air-conditioning render as well as fully operational; fifty-fifty when the device it was charging has been removed.  Although the ability render is non powering anything, it all the same consumes power.  The maximum off charge ability consumption varies amongst the output ability of the EPS as well as is stated inwards the specification.

Minimum average efficiency level

With loads less than the total rating of the EPS, the efficiency of the ability render tin decrease significantly.  Low charge weather happen every bit a battery becomes partially charged, or when a device goes into an inactive (sleep) mode.  External ability supplies rarely stay inwards a 75 to 100% charge condition.

First legislation was announced inwards 2004, starting amongst the California Energy Commission’s (CEC) intent to limit the sale of non-efficient external ability supplies.  The USA, EU, Communist People's Republic of China as well as a host of other countries as well as regions followed over the side yesteryear side 10 years amongst increasingly tighter legislation.

In 2014, the European Union issued a voluntary Code of Conduct (CoC) version 4, running inwards parallel amongst the mandatory Ecodesign Directive 278/2009.  Also inwards 2014, the Department of Energy (DoE) published their Energy Efficiency Level VI standard. 

In Feb 2016, the Level VI measure became police push clitoris inwards the US.  The European Union issued the to a greater extent than stringent version five CoC Tier 2 voluntary measure that was supposed to move into final result Jan 2018. That has been delayed as well as mandatory implementation was expected early on inwards 2018.

Table 1 shows unopen to of the differences for a unmarried output, basic voltage ability render betwixt these 2 newest standards. Efficiency limits convey been given for a ability render rated betwixt 49 to 250W.  Please consult the relevant the States as well as European Union websites for the total regulations.



Table 1: Influenza A virus subtype H5N1 comparing betwixt the latest the States as well as European Union regulations

Average efficiency measurements are required at iv charge conditions; 25, 50, 75 as well as 100%.  These are added together as well as divided yesteryear iv to arrive at an average efficiency figure.

Note, the European Union has added a minimum efficiency degree at 10% load.

The USA straightaway includes ability supplies that are rated at greater than 250W.

The term external ability render is defined yesteryear the the States Department of Energy every bit i that is used to convert household electrical electric flow into DC electrical flow or lower-voltage air-conditioning electrical flow to run a consumer product.  Currently the the States besides grants exemptions for supplies powering FDA approved medical devices.

Modifying a ability render to come across a decrease inwards off-load ability consumption is non a uncomplicated constituent change.  The command IC oft has to hold upwards changed to i that draws less ability as well as release energy saving techniques similar pulse skipping implemented.  Changes to primary side circuitry requires resubmitting the products to convey the security certifications updated.  Both the redesign as well as submittal procedure are expensive as well as older products are oft obsoleted every bit a final result of this.  As the release energy standards are directed at the ultra-high volume, curt production life consumer EPSs, this gives unopen to relief to the industrial marketplace which prefers long production lifecycles.

TDK-Lambda has a number of external ability supplies inwards the DT series that come across all the latest requirements, amongst ratings upwards to 300W.

Thursday, 13 December 2018

Info!! Minimum Loads In Addition To Cross-Regulation On Multiple Output Ability Supplies

One bailiwick that our Technical Support squad oftentimes gets asked most is minimum loads on multiple output ability supplies, thus I idea this would hold upwards a practiced bailiwick to write about.


On a depression cost, depression power, multiple output ability supply, the datasheet volition often acre that to hold regulation, a minimum charge has to hold upwards applied to i or to a greater extent than of the outputs.

To explicate why, hither is a block diagram of i such unproblematic triple output ability supply.


On the middle right mitt side of the diagram are the 3 output windings from the transformer.

On Channel 1 (+5V), the output from the transformer is rectified as well as filtered to provide a smooth, DC output. If that output voltage is non at the fix voltage, tell due to a charge change, the ability render volition automatically right itself. It does this past times sensing the output voltage, comparison it to an internal reference, as well as feeding dorsum a indicate to the command circuit via the opto-coupler. The command circuit volition as well as thus adapt the pulse width of the converter accordingly. The rule on this output is typically 1 to 2%.

On Channels 2 & 3 (+V as well as –V) though, it tin dismiss hold upwards seen that in that place is no feed dorsum to the command circuit. These outputs are referred to equally “semi-regulated”. If Channel 2’s charge were to growth for example, the output would drib slightly, but in that place would non hold upwards whatever automatic correction. That voltage drib is specified past times the charge rule specification, typically 3 to 5%.

With honor to minimum loading, if in that place is piffling or no charge on Channel 1, the output volition nonetheless hold upwards at the fix voltage, but the switching converter pulse width volition hold upwards really narrow. The output voltage on Channels 2 & 3 drops fairly dramatically at those narrow pulse widths, peculiarly if the outputs are supplying their total rated load. An output voltage of 12V may drib to 8V.

Conversely, if the total rated charge is applied to Channel 1, but Channels 2 & 3 are non loaded, the voltages on 2 & 3 volition rise, as well as a 12V output could deliver over 14V.

The termination that varying loads on Channel 1 has on the “semi-regulated,” Channels 2 & 3, is many times referred to equally the “cross regulation” specification.

Manufacturers of ability supplies specify a minimum charge requirement on Channel 1, usually 10%, to warn the user. Minimum loads may besides hold upwards specified on Channels 2 & 3 to promote a improve rule specification.

Operating without a minimum charge volition non unremarkably crusade a ability render to fail, but tin dismiss stress the user’s equipment.

Some products similar TDK-Lambda’s MTW serial employ ii converters to improve ability render regulation, i to render Channel 1 & i to render Channels 2 & 3. Note that both V2 as well as V3 are sensed past times the command circuit.
Fig. 2: Two converters (click to enlarge image)


Here is a link for to a greater extent than details most the MTW series: http://www.us.tdk-lambda.com/lp/products/mtw-series.htm

Other products similar the NV175 serial employ post regulators on each output, completely eliminating the minimum charge requirement. Although this does add together terms to the ability supply, it removes whatever trace of piece of job concern for the user as well as helps amongst organization flexibility. Here is a link to the datasheet for NV175 series: http://www.us.tdk-lambda.com/lp/ftp/Specs/nv175.pdf

Info!! Ability Render Remote Feel Mistakes In Addition To Remedies

Most medium to high ability AC-DC ability supplies as well as some DC-DC converters include "Remote Sense" connectedness points (+ as well as - Sense) that are used to tightly regulate the supply's output voltage at the load. Since the output cables that connect a ability supply's output to its charge receive got some resistance, every bit electrical flow period of time increases, then volition the voltage drib across the cables (I x R = Voltage Drop). Moreover, since it's best to regulate the voltage straight at the load, the utilisation of the ii Remote Sense wires connected from the render to the charge volition compensate for these unwanted voltage drops. Refer to Fig. 1 which shows the typical connections when the Remote Sense role is used.

Fig. 1: Power Supply amongst Twisted "Remote Sense" Wires Connected to the Load

Typical "Remote Sense" Problems & Remedies
  1. Most remote sensing circuits are capable of compensating for from 0.25V to 0.75V of voltage-drops across the output cables. However, to move sure, e'er cheque your ability supply's pedagogy manual to decide its maximum remote feel compensating range. If the voltage drib across the output cables exceeds the compensating hit of the remote feel circuits, the voltage at the charge volition no longer move regulated. This occupation tin laissez passer notice move remedied past times either reducing the length of the output cables or increasing the size (heavier wire gauge) of the output cable's to trim back the excessive voltage drop. Voltage drops across the output cables should move minimized since this is a beginning of wasted power. For example, amongst only a 0.5V cable drib amongst a 100A load, the lost ability amounts to 50W inwards each cable or 100W total.
  2. The remote feel role automatically increases the output voltage at the output terminals of the render to compensate for whatsoever unwanted voltage drib inwards the output cables amongst heavy charge currents. Likewise, the remote feel role decreases the output voltage of the render when the required charge electrical flow is reduced. In some applications, the ability supply's output needs to move adjusted past times the user to voltage higher than its nominal (e.g. 5V nominal, adjusted to 5.5V). Always conform the ability supply's output spell criterion the voltage at the load. In addition, tending should move taken to assure that nether total charge that the remote feel role does non force the Vout to a higher voltage that could perhaps trip the OVP set-point as well as shutdown the supply. Therefore, e'er read the ability supply's pedagogy manual to move aware of the supply's adjustment hit as well as OVP set-point.
  3. The remote feel leads bear really picayune electrical flow then low-cal approximate wires tin laissez passer notice move used. However, steps should move taken to ensure that the remote feel wires create non alternative upwards radiated noise past times either twisting the + as well as - Sense wires together and/or past times shielding the wires from the noise (refer to Fig 1). It is best to utilisation dissimilar colored feel wires (e.g., dark as well as red) then that subsequently they are twisted it is slow to decide which wire is the + as well as – Sense.
  4. Refer to Fig. 2 below for a simplified schematic of a ability supply's remote feel circuits. It is of import to detect the right polarities, i.e., the +Sense wire should connect at the charge almost the +Vload connectedness as well as the –Sense wire should connect at the charge almost to the – Vload connection. If past times error the remote feel wires are crossed-connected (+Sense to –Vload as well as – Sense to +Vload) electrical flow volition period of time inwards the Sense lines as well as burn downward out the internal Rsense resistors, causing a malfunction of the supply. Typically, these internal Rsense resistors are unopen to 10 to 100 Ohms amongst a maximum rating of 0.5W.
Fig. 2: Simplified Schematic of Remote Sense Circuit amongst External Output & Sense Wires

  1. We receive got seen applications where the user has installed a switch or fuse inwards serial amongst i or both output wires. This tin laissez passer notice travail a serious occupation if the remote feel lines rest connected to the load, because if the output cable switch or fuse opens, electrical flow volition period of time inwards the feel lines as well as travail the internal Rsense resistors to burn downward up. System debugging tin laissez passer notice travail like problems, for example, where the ability as well as feel cables are located on split connectors as well as if past times error, solely the ability cable connector is disconnected. 
  2. There are applications where the user may non desire to utilisation the remote feel feature. In these cases, the remote feel lines should non move left opened upwards for optimum charge regulation; instead, a local feel configuration must move used. Referring to Fig. 3, to utilisation a local feel fix the + as well as -Sense lines should move connected to either their corresponding local feel (LS) terminals, which are provided on many ability supplies, or connected to the corresponding +Vout as well as –Vout terminals. Most ability supplies are shipped from the manufacturing industrial plant life amongst these "Local Sense" jumpers installed on the ability render (see photos below).
Fig. 3: Schematic of Power Supply amongst "Local Sense" Jumpers Installed

Photo of Power Supply amongst Local Sense Wires Connected (see Red & Black jumper wires)

Photo of PSU amongst Sense Screw Terminals Connected to Output Screw Terminals amongst Metal Jumpers
In summary, the "Remote Sense" characteristic automatically compensates for unwanted output cable drops, which vary every bit the output electrical flow increases as well as decreases. This characteristic is advantageous to the user, but is dependent champaign to mistakes that should move avoided to insure the proper functioning of the ability render as well as the end-product.

Info!! External Ability Provide Efficiency Standards

Note: As the final European Union implementation appointment has slipped, this is the electrical flow province of affairs every bit of August 24, 2018.  Influenza A virus subtype H5N1 draft European Union amendment dated 2018 indicates that the legislation may mirror to a greater extent than closely the DoE Level VI limits effective April, 2020.

External ability supplies (EPS) are widely used inwards households around the globe to accuse phones or run tablets, laptops, game consoles as well as a multifariousness of consumer electronic as well as electrical items.

Studies on European release energy purpose of these ability supplies signal that reducing off-load ability consumption as well as improving production efficiency volition salve around 10TWh of ability a year.  Influenza A virus subtype H5N1 Terawatt hr (TWh) is 1,000,000,000,000 Watts used inwards an hour.  Reducing release energy usage saves money, reduces the requirement to add together novel ability generating capacity as well as reduces environmental pollution.

Two parameters were originally specified to regulate waste matter release energy reduction, which when multiplied yesteryear a billion products becomes really significant:

Maximum off-load ability consumption

Many ability supplies are left plugged inwards to the air-conditioning render as well as fully operational; fifty-fifty when the device it was charging has been removed.  Although the ability render is non powering anything, it all the same consumes power.  The maximum off charge ability consumption varies amongst the output ability of the EPS as well as is stated inwards the specification.

Minimum average efficiency level

With loads less than the total rating of the EPS, the efficiency of the ability render tin decrease significantly.  Low charge weather happen every bit a battery becomes partially charged, or when a device goes into an inactive (sleep) mode.  External ability supplies rarely stay inwards a 75 to 100% charge condition.

First legislation was announced inwards 2004, starting amongst the California Energy Commission’s (CEC) intent to limit the sale of non-efficient external ability supplies.  The USA, EU, Communist People's Republic of China as well as a host of other countries as well as regions followed over the side yesteryear side 10 years amongst increasingly tighter legislation.

In 2014, the European Union issued a voluntary Code of Conduct (CoC) version 4, running inwards parallel amongst the mandatory Ecodesign Directive 278/2009.  Also inwards 2014, the Department of Energy (DoE) published their Energy Efficiency Level VI standard. 

In Feb 2016, the Level VI measure became police push clitoris inwards the US.  The European Union issued the to a greater extent than stringent version five CoC Tier 2 voluntary measure that was supposed to move into final result Jan 2018. That has been delayed as well as mandatory implementation was expected early on inwards 2018.

Table 1 shows unopen to of the differences for a unmarried output, basic voltage ability render betwixt these 2 newest standards. Efficiency limits convey been given for a ability render rated betwixt 49 to 250W.  Please consult the relevant the States as well as European Union websites for the total regulations.



Table 1: Influenza A virus subtype H5N1 comparing betwixt the latest the States as well as European Union regulations

Average efficiency measurements are required at iv charge conditions; 25, 50, 75 as well as 100%.  These are added together as well as divided yesteryear iv to arrive at an average efficiency figure.

Note, the European Union has added a minimum efficiency degree at 10% load.

The USA straightaway includes ability supplies that are rated at greater than 250W.

The term external ability render is defined yesteryear the the States Department of Energy every bit i that is used to convert household electrical electric flow into DC electrical flow or lower-voltage air-conditioning electrical flow to run a consumer product.  Currently the the States besides grants exemptions for supplies powering FDA approved medical devices.

Modifying a ability render to come across a decrease inwards off-load ability consumption is non a uncomplicated constituent change.  The command IC oft has to hold upwards changed to i that draws less ability as well as release energy saving techniques similar pulse skipping implemented.  Changes to primary side circuitry requires resubmitting the products to convey the security certifications updated.  Both the redesign as well as submittal procedure are expensive as well as older products are oft obsoleted every bit a final result of this.  As the release energy standards are directed at the ultra-high volume, curt production life consumer EPSs, this gives unopen to relief to the industrial marketplace which prefers long production lifecycles.

TDK-Lambda has a number of external ability supplies inwards the DT series that come across all the latest requirements, amongst ratings upwards to 300W.