Monday, 17 December 2018

Info!! Choosing An Input Emi / Emc Filter For A Ability Supply

There are 2 main functions that an input EMI filter tin perform:
  1. Minimize outgoing electrical racket to avoid interfering alongside neighboring equipment
  2. Attenuate (reduce) incoming electrical racket that could harm the system
Regarding outgoing noise, although almost ability supplies run across the governmental regulations for EMI, racket is additive in addition to if at that spot are multiple ability supplies or high speed processor boards, it tin resultant inwards a failing grade.

If the racket is solely slightly out of specification, thence a (lower cost) unmarried phase filter may suffice. If the racket is considerably out of specification thence a higher functioning 2 phase filter volition live on required.

An event of these would live on Lambda’s RSEN (single stage) in addition to RSHN (two stage) filters. Look for the price “wideband” or “low frequency attenuation” inwards the features.

Incoming electrical racket is ordinarily inwards the degree of a spike or flare-up of energy. It tin live on generated from natural causes such every bit a lightning tempest or human made yesteryear a large slice of industrial equipment.

This type of filter may convey “high pulse attenuation” listed every bit a characteristic in addition to volition convey internal values optimized to trim these potentially harmful spikes from reaching the ability supply. The filter volition likewise convey unopen to outgoing racket attenuation, merely may non live on every bit effective. An event would live on Lambda’s RSMN serial of filters.

Info!! Harvesting To A Greater Extent Than Liberate Energy Without Edifice To A Greater Extent Than Ability Plants

An AC-DC switch-mode ability render without Power Factor Correction (PFC) tin delineate roughly 950 Watts from a typical 115VAC wall socket protected yesteryear a 15A circuit breaker earlier exceeding the UL mandated bound of 12A. Influenza A virus subtype H5N1 unproblematic charge similar a toaster tin delineate almost 1400 Watts. The divergence betwixt the 2 is due to the higher Power Factor (PF) of the toaster, which presents a resistive charge to the ability line. If nosotros right the Power Factor of the switchmode render it tin together with so delineate close every bit much ability every bit the toaster, allowing it to provide to a greater extent than output ability to its charge from the same 115VAC/15A wall socket.

What is Power Factor Correction (PFC)?
Power Factor (PF) is technically the ratio of existent ability consumed to the apparent ability (Volts-RMS x Amps-RMS), together with is expressed every bit a decimal fraction betwixt 0 together with 1. PF is traditionally known every bit the stage divergence betwixt sinusoidal voltage together with electrical flow waveforms. When the air-conditioning charge is partly capacitive or inductive, the electrical flow waveform is out of stage alongside the voltage (Fig. 1, the dotted line of piece of occupation is the electrical flow waveform). This requires additional air-conditioning electrical flow to hold out generated that isn't consumed yesteryear the load, creating wasted I2R (wattage) losses inwards the ability lines.

An electrical motor is inductive, specially when it is starting. The electrical flow waveform lags behind the voltage waveform, dropping the PF to good below 1 (similar to Fig. 1). This is why many motors accept “starting” capacitors installed to counteract the inductance, together with hence right the PF during motor startup.

mode ability render without Power Factor Correction  INFO!! Harvesting More Energy without Building More Power Plants
Figure 1. Voltage together with electrical flow waveforms are sinusoidal but out-of-phase; PF <1 .="" span="">

Influenza A virus subtype H5N1 unproblematic resistive charge has the highest PF of 1. An air-conditioning voltage across the resistor causes an air-conditioning electrical flow which is identical to together with in-phase alongside the voltage waveform (Fig. 2).

mode ability render without Power Factor Correction  INFO!! Harvesting More Energy without Building More Power PlantsFigure 2. Voltage together with Current waveforms are sinusoidal together with in-phase; PF=1.

Influenza A virus subtype H5N1 switchmode ability render when viewed every bit an air-conditioning charge is neither capacitive nor inductive, but non-linear. Influenza A virus subtype H5N1 switchmode render conducts electrical flow inwards curt pulses or spikes that are in-phase alongside the line of piece of occupation voltage (Fig. 3). The production of “Volts-RMS x Amps-RMS” is considerable higher than the existent ability consumed, together with thus the PF is much less than 1, typically about 0.65 or less.

mode ability render without Power Factor Correction  INFO!! Harvesting More Energy without Building More Power PlantsFigure 3. Voltage waveform is sinusoidal, electrical flow waveform is non-sinusoidal but in-phase; PF<1 .="" br="">

Improving the Power Factor
Low Power Factors tin hold out improved via Power Factor Correction (PFC) circuits. The types used for switchmode ability supplies “smooth out” the pulsating air-conditioning current, lowering its RMS value, improving the PF together with reducing the chances of a circuit breaker tripping. There are 2 basic types of PFC: Active together with Passive. Active PFC is to a greater extent than effective, a fleck to a greater extent than expensive, to a greater extent than oftentimes than non integrated into the switchmode ability supply, together with tin accomplish a PF of close 0.98 or better. Passive PFC is less expensive together with typically corrects the PF to close 0.85.

Harvesting Additional Output Power
To create upwards one's heed only how much to a greater extent than ability is available from the air-conditioning line of piece of occupation together with a ability render alongside PFC, the user needs to sympathise the next equation, which defines the amount of output ability (Pout) available from a switchmode supply:

Pout = VL-RMS x IL-RMS x PF x Eff

For example, UL limits a system's line of piece of occupation electrical flow to 80% of the circuit breaker's rating. For a typical 15A breaker, 12A is the maximum allowed, together with the best-case ability available is hence 120VAC x 12A = 1440 Watts. Referring to the higher upwards equation, hither are 2 examples of supplies alongside dissimilar ability factors:

  • A switch-mode render alongside 0.65 PF together with 85% efficiency tin entirely deliver (120 x 12 x 0.65 x 0.85) = 796 Watts (Pout).
  • However, if the ability component is corrected to 0.98, the same ability render tin at nowadays deliver (120 x 12 x 0.98 x 0.85) = 1200 Watts (Pout), a 51% increase.

From the examples above, it tin hold out seen that yesteryear employing ability supply’s alongside PFC, to a greater extent than output ability tin hold out delivered to the OEM’s end-product, without the involve to increment the air-conditioning ability wire sizes, increment the circuit breaker’s rating or delineate to a greater extent than electrical flow from the ability plants. Thus, PFC has a pregnant outcome on our environs relative to reducing the pollutants coming from electrical ability plants.

Meeting International Regulations
Since switchmode ability supplies without PFC tend to delineate the air-conditioning line of piece of occupation electrical flow inwards a non-linear fashion, many unwanted harmonic currents are generated together with reflected dorsum on the air-conditioning ability lines. These reflected harmonic currents are “pollutants” to the ability grid that accept a negative deport upon on other devices connected to the same ability lines. These unwanted harmonic currents tin hit inwards frequency from the 100 Hz on upwards to over 2,000 Hz, together with accept a straightaway human relationship to the Power Factor of switchmode ability supplies.

An of import argue to accept PFC inside your ability render is to comply alongside international regulations, specially if yous recollect to sell your equipment inwards Europe. Since 2001, the European Union (EU) established limits on harmonic currents that tin look on the mains (AC line) of switchmode ability supplies. These regulations were position inwards house to maximize the available ability generated each hateful solar daytime yesteryear electrical ability plants located worldwide. The intent was to brand the most of the ability nosotros accept today without expanding our carbon footprint. Today, the most of import rule is the “European Norm” EN61000-3-2. This rule applies to ability supplies alongside input ability of 75 watts or greater, together with that delineate upwards to sixteen amps off the mains. It sets severe limits on the harmonic currents upwards to the 39th, when measured at the input of switchmode ability supplies. Power supplies alongside PFC circuits that encounter EN61000-3-2 inherently accept high ability factors that are typically 0.97 or better.

Summary
As previously mentioned, "Power Line Harmonics" are created whenever the line of piece of occupation electrical flow is non a pure sinewave, every bit is the instance alongside a switchmode ability supply's input, which tend to accept “pulsed” currents (Fig 3). Measuring ability line of piece of occupation harmonics is a mathematical way to delineate a complex waveform's Power Factor yesteryear resolving it into a key frequency together with its many harmonics.

The harmonic currents produce non contribute to the output charge power, but campaign unwanted heating inwards the wall socket, wiring, circuit breaker, together with distribution transformers, resulting inwards wasted energy. When personal computers outset hitting the mainstream market, their ability supplies lacked PFC. As a result, circuit breakers that seemed to hold out sized correctly for the charge were tripping for no apparent reason. After investigation, it was determined that the misfortunate ability component of the PC’s ability supplies was the culprit.

Today novel “green initiatives” are dictating that personal computers include ability supplies which must accept Power Factor Correction (PFC) together with high efficiencies. PFC significantly reduces harmonics, resulting inwards almost a pure “fundamental” electrical flow frequency that volition hold out in-phase alongside the voltage waveform (Fig. 2). International regulations dictate the substantial attenuation of harmonic currents. The vast majorities of AC-DC ability supplies manufactured yesteryear TDK-Lambda Americas employ active PFC, are inwards accordance alongside EN61000-3-2 together with provide typical ability factors inwards the hit of 0.97 to 0.99.


mode ability render without Power Factor Correction  INFO!! Harvesting More Energy without Building More Power Plants

Info!! What Is Remote Sensing?

Most medium to high ability AC-DC ability supplies in addition to DC-DC converters get got “Remote Sense” connexion points (+/- Sense) that are used to regulate the supply’s output voltage at the load. Since the cables that connect a ability supply’s output to its charge get got to a greater extent than or less resistance, every bit electrical current flows it volition drive a voltage drib inward the cables. Since it is best to regulate the voltage at the charge site, the purpose of the 2 Remote Sense wires connected from the provide to the charge volition compensate for these voltage drops.

Typical remote sensing circuits are capable of correcting from 0.3V to 1.0V of voltage-drop inward the output cables. However, to live on sure, e'er cheque your ability supply’s teaching manual to decide the maximum remote feel compensating range. If the voltage drib across the cables transcend the attain of the remote feel circuits, this tin live on remedied yesteryear either reducing the length of the cables or increasing the size of the cable’s conductors. The remote feel leads send rattling lilliputian current, then calorie-free approximate wires tin live on used. Steps should live on taken to ensure the remote feel wires produce non selection upward racket yesteryear either twisting the +/- Sense wires together and/or shielding the wires from noise. It is of import to discovery the right polarities, i.e., the +Sense wire should connect at the charge to the +V output cable in addition to the –Sense wire should connect at the charge to the –V output cable. Refer to Figure 1.

  Since the cables that connect a ability provide INFO!! What is Remote Sensing?Fig. 1: Power Supply amongst Remote Sense Wires Connected at the Load

When non using the remote feel feature, Local Sense (LS) connections should live on used. In this representative the +/-Sense points should live on connected to their corresponding output or local feel terminals at the ability provide (+Sense to +V output or +LS and, –Sense to –V output or -LS). Most ability supplies are shipped from the manufactory amongst these “Local Sense” connections inward place.
Refer to Figure 2.

  Since the cables that connect a ability provide INFO!! What is Remote Sensing?Fig. 2: Power Supply amongst Local Sense Jumpers Installed

Info!! Ability Supplies Alongside Broad Arrive At Adjustable Outputs

For to a greater extent than or less ability render applications it is desirable to alter the output voltage over a broad range. There are a position out of ways to command the output voltage of ability supplies that are designed to provide broad adjustment ranges. Remotely adjustable output voltages tin endure implemented past times using 1 of the next methods.


Variable Voltage Control
In this instance an external variable command voltage (e.g., 1-6V) is connected to the designated input of the ability supply, sometimes called the PV input. As the input command voltage is varied it volition drive the output voltage to alter inwards a fairly linear fashion over a broad arrive at (e.g., 20% to 120% of the nominal output voltage). For to a greater extent than or less applications this is a depression terms method of providing a programmable ability supply. Below are diagrams showing an instance of this type of remote voltage adjustment for Lambda’s HWS/PV together with SWS-L series of ability supplies.

For to a greater extent than or less ability render applications it is desirable to alter the output voltage over a wid INFO!! Power Supplies amongst Wide Range Adjustable OutputsExternal Variable Voltage Control (1-6V)

For to a greater extent than or less ability render applications it is desirable to alter the output voltage over a wid INFO!! Power Supplies amongst Wide Range Adjustable OutputsOutput Voltage Change (20-120%) amongst Ext. Variable Voltage Control (1-6V)


Variable Resistive Control
Some ability supplies tin endure remotely adjusted via a variable resistive command (external potentiometer). This method has the payoff that an external voltage is non required since an internal Ref. voltage is provided past times the supply. As the resistance changes, it volition drive the output voltage to alter inwards a non-linear fashion over a broad arrive at (e.g., 20% to 120% of the nominal output voltage) every bit shown inwards the diagrams below (Lambda’s HWS/PV series). For to a greater extent than or less applications this is a depression terms method of providing a programmable ability supply.


For to a greater extent than or less ability render applications it is desirable to alter the output voltage over a wid INFO!! Power Supplies amongst Wide Range Adjustable OutputsExternal Variable Resistive Control (50k ohm pot.)


For to a greater extent than or less ability render applications it is desirable to alter the output voltage over a wid INFO!! Power Supplies amongst Wide Range Adjustable OutputsOutput Voltage Change (20-120%) amongst Ext. Variable Resistive Control (50k ohm pot.)


Serial Digital Control
Programmable Power Supplies tin endure remotely controlled via a series digital port such every bit RS232 or RS485. Both the output voltage together with electrical flow tin endure controlled from goose egg to the maximum output ratings. In addition, warning signals from the supplies tin endure sent dorsum to the remote reckoner or controller via the same digital link. Programmable Power Supplies are to a greater extent than expensive than broad adjustable supplies mentioned above, but they convey a large array of local together with remote command features that are non constitute elsewhere. Lambda’s ZUP series is a expert instance of a feature-rich Programmable Power Supply.


For to a greater extent than or less ability render applications it is desirable to alter the output voltage over a wid INFO!! Power Supplies amongst Wide Range Adjustable OutputsUp to 31 ZUP Series Programmable Supplies tin endure Remotely Controlled via RS485 Interfaces

Info!! Over Electrical Flow Protection Inwards Ability Supplies & Converters

Most AC-DC ability supplies in addition to DC-DC converters bring internal current-limiting circuits to protect the ability device, in addition to to simply about bird its load. The bulk of over-current-protections include an automatic recovery feature. In practice, the electrical flow bound characteristic typically starts operating when the output electrical flow exceeds it maximum rating past times ten to 20%.

In many cases, should an overload (e.g., curt circuit) travel allowed to be for a prolonged period, it tin trim down the product’s champaign life past times temperature stressing the electrolytic capacitors, in addition to inward extreme cases, it tin impairment the user’s printed circuit traces. Therefore, ever cheque the ability supply’s “Instruction Manual” to travel certain yous empathise the precautions associated alongside the ability product’s over-current-protection feature. Also, if the ability production has an Output Good signal, this tin travel used every bit an indication that the ability furnish is either faulty or could travel inward an over-current mode.

There are a let out of ways to implement over-current-protection (OCP), in addition to below are descriptions of the most mutual methods.

Fold-Back Current Limiting: When this method is employed if an overload status exists, the output voltage in addition to electrical flow trim down to rubber levels. As tin travel seen from the next curve, should an overload come about the furnish volition provide electrical flow upwards its electrical flow bound betoken (aka ‘knee’), in addition to and thus the output electrical flow volition fold-back to a lower value every bit the output voltage reduces towards zero.

This technique is employed inward linear ability supplies because it reduces the strain on the supply’s internal ability devices to minimum. One drawback of fold-back electrical flow limiting is that if the furnish turns on into a heavy capacitive load, it could latch-up at a reduced electrical flow earlier reaching its amount output voltage. Depending upon the design, recovery from a fold-back electrical flow bound status tin travel automatic, or afterwards a built-in fourth dimension delay when the overload status is removed.

limiting circuits to protect the ability device INFO!! Over Current Protection inward Power Supplies & ConvertersFold-Back Current Limiting

Fold-Forward Current Limiting: In this method, when an overload is sensed the output voltage reduces towards zero, but the electrical flow increases. When driving motors, pumps, or highly capacitive loads, employing a fold-forward electrical flow characteristic tin aid overcome the electrical inertia of these loads. Recovery from a fold-forward electrical flow limiting province of affairs is usually automatic when the overload is removed.

limiting circuits to protect the ability device INFO!! Over Current Protection inward Power Supplies & ConvertersFold-Forward Current Limit

Constant Current Limiting: In this method, should an overload occur, the output electrical flow stays at its bound betoken in addition to the output voltage reduces towards nada inward a somewhat linear fashion. This technique is used inward many switchmode ability furnish designs. Typically, the furnish volition automatically render to its normal output voltage when the overload status is no longer present.
limiting circuits to protect the ability device INFO!! Over Current Protection inward Power Supplies & ConvertersConstant Current Limiting

Current Limit Shutdown: In simply about ability furnish designs, when an overload occurs the ability furnish volition laid out to larn into a constant-current bound mode, but when the output reaches a preset reduced voltage, the furnish volition shutdown. Recovery from this status tin travel automatic or bespeak recycling of the input power.

Hiccup Mode Current Limiting: Some depression ability supplies bring what is termed a hiccupcurrent-limit feature. As the shout out implies, if a electrical flow bound is sensed, the furnish volition trim down its output voltage to nada in addition to then, afterwards a curt time, it volition endeavor to provide its normal voltage. These On-Off attempts at functioning are referred to every bit a hiccup-mode. Should the overload status travel removed, the furnish volition i time again travel normally.

Peak-Current Power Supplies
It should travel mentioned that simply about ability supplies are designed specifically to provide large peak-currents, which tin make from 200 to 300% of the maximum electrical flow rating for a curt duration, without going into a current-limit condition. These are specially useful when powering loads that include electrical motors such every bit figurer difficult drives, fans, actuators, pumps, etc. When using this type of ability furnish it is of import to bound the “average power” that is delivered to load. More data almost peak-current-rated supplies volition travel provided inward a kind article.