Showing posts with label DC-DC converters. Show all posts
Showing posts with label DC-DC converters. Show all posts

Monday, 17 December 2018

Info!! Types Of Distributed Ability Architectures

Compact DC-DC converters cause got made their way into millions of electronic products as well as systems. The vast bulk of these depend upon an air-conditioning front-end-box to convert the air-conditioning ability beginning into a DC voltage from which the converters operate. In addition, international regulations cause got mandated that these front-end-boxes include Power Factor & Harmonic Correction (PFHC) to maximize the available ability from the ability grid.

Traditional Distributed Power Solutions

Traditional designs that employ distributed ability architecture house DC-DC converters on PC boards really about the point-of-load to maximize arrangement speeds as well as efficiencies. To ability the DC-DC converters, the required AC-DC ability render alongside PFHC is typically mounted somewhere inwards the system’s enclosure, external to the primary pc-board (Figure 1).

DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures

This technique is quite reasonable for nearly applications. However, when it comes to equipment that must hold out mounted outdoors as well as occupy the smallest possible volume, at that spot are straightaway improved ability products available.

Improved Power Distribution Methods

Typical medium ability (400-700 watts) PCB mounted DC-DC converters are packaged inwards “full brick” sizes (e.g., 2.4” west x 4.6” L x 0.5” H). Influenza A virus subtype H5N1 give away of major manufacturers of DC-DC converters cause got seen the involve for, as well as are straightaway providing air-conditioning input PFHC front end ends inwards brick-formats that are PCB mountable close to the DC-DC converter(s). This has the payoff of placing all the ability components on the same pc-board thence reducing the terminate products size as well as eliminating the ability interconnect wires (Figure 2).

DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures
These AC-DC w/PFHC front-end bricks require some external components (capacitors, resistors, etc.), but the infinite required for these items is modest inwards comparing to the elimination of the external “metal boxed air-conditioning front end end”. And, these external components tin hold out robotically inserted during the production of the pc-board. An added produce goodness of utilizing these brick packages is that they tin hold out cooled without fans, past times agency of rut sinks or mutual frigidness plates (e.g., mounting the brick bases against the system’s metallic enclosure).

The Latest AC-DC Power “Brick” Solutions

Power Supply manufacturers cause got non stopped developing smaller as well as ameliorate ability solutions. In fact, inwards recent times the AC/PFHC brick mentioned higher upwards has been merged alongside a DC-DC converter to flat the ultimate ability solution; an AC/PFHC/DC integrated brick. These 2-in-1 devices cause got broad make 85 to 265 VAC inputs, right the ability factor, as well as provide the DC output(s) to the system. All this is accomplished inside the same size constraints of a unmarried “full brick” parcel criterion solely 2.4” west x 4.6” L x 0.5” H, thence providing a 50% board infinite savings (Figure 3).
DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures
These integrated 2-in-1 pcb-mounted Power Bricks are ideal for Distributed Power Architectures where POL (Point of Load) Converters are needed. Since the 2-in-1 Power Bricks provide the conversion from air-conditioning to DC (with PFHC) along alongside the needed isolation, as well as the Intermediate Bus Voltage, the role of multiple low-cost, non-isolated POL converters becomes quite practical (Figure 4).
DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures
Recent advances inwards components as well as ability pattern technologies cause got made these new
2-in-1 pcb-mount ability bricks possible. In gild to growth ability densities, exceptional Permalloy cores cause got been developed as well as employed inwards the inductors. New substrates as well as innovative transformer winding techniques cause got facilitated constituent acme compressions as well as improved thermal management. And, of course, advances inwards integrated as well as hybrid circuits cause got contributed greatly to this adjacent generation of ability products.

Applications of 2-in-1 AC-DC Power Bricks

These novel “2-in-1” AC-DC ability bricks are ideal for many outdoor as well as indoor applications including:
  • Custom Power Supplies
  • PCB Mounted Bulk Power for Multiple DC-DC or POL Converters
  • Large LED & Liquid Crystal Displays
  • Traffic Information, Control, & Signaling Equipment
  • Toll Devices
  • Pico & Cell Phone Repeaters
  • WiFi, Telecom Sub-Stations
  • Underwater Surveying Devices
  • Automatic Pass-Reading-Devices for FastTrac Car Lanes
  • Oil Pumping & Pipeline Monitoring Devices
  • Security Systems
New 2-in-1 AC-DC Power Bricks

Lambda, a unit of measurement of TDK Corp., is currently i of the manufacturers of a novel make of integrated “single-brick” AC-DC ability bricks. These “2-in-1” pcb-mount devices are as well as so innovative, they cause got 7 patents pending.

Some of the salient features of Lambda’s single-brick AC-DC PFE Series ability modules include:
  • Operates from Universal 85 to 265VAC, 47-63Hz Input
  • Power Factor & Harmonic Correction Meets EN61000-3-2
  • Low Profile, Single-Brick Footprint
  • High Power Density (up to 129W/in3) & Efficiency (up to 90%)
  • Regulated as well as Isolated DC Outputs alongside Wide Operating Temperatures (at baseplate)
  • PFE500-12: 12VDC Output, 400 Watts, -40 to +85°C
  • PFE500-28: 24 to 28VDC Output, 500 Watts, -40 to +100°C
  • PFE500-48: 48VDC Output, 500 Watts, -40 to +100°C
  • PFE700-48: 51VDC Output (semi-regulated), 714 Watts, -40 to +85°C
  • ±20% Output Voltage Adjustment Range
  • Over Voltage/Current/Temperature Protection
  • Approved to UL/CSA/EN60950-1, CE Marked, & RoHS Compliant
  • Optional Heatsinks & Evaluation Kits Available

Info!! Tin One Run My Ac-Dc Ability Provide Amongst A Dc Input?

The answer is yes, sometimes.

Many criterion AC-DC switch fashion ability supplies (most of Lambda’s products) specify a high voltage DC input make inwards add-on to the to a greater extent than mutual air-conditioning input make of 90-264VAC. We have many questions well-nigh how together with where to connect the DC input to an AC-DC furnish that is spec’d to travel off of DC likewise equally an air-conditioning inputs.

Where together with why is high voltage DC ability used? It turns out that many ability generation facilities provide a high voltage DC to ability the plant’s equipment rather than the regular 115VAC or 208VAC ability grid. This high voltage DC (typically 120 or 130-330VDC) tin last easily used amongst batteries to provide a secure root of ability rather than using expensive centralized or local UPS systems.

Now dorsum to the subject. The topology of many switch-mode ability supplies genuinely lends itself to performance from either air-conditioning or DC input. Important Note: Always banking concern jibe your ability supply’s Operations Manual or spec canvass to confirm that it is designed to travel from either an air-conditioning or DC input.

Referring to the simplified ability furnish schematic below:

 specify a high voltage DC input make inwards add-on to the to a greater extent than mutual air-conditioning input make of  INFO!! Can I Operate my AC-DC Power Supply amongst a DC Input?
When powered yesteryear an air-conditioning sine wave, during the showtime one-half bike the electrical flow flows from the Line final through the input filter together with charges capacitor C1 through diodes D1 together with D3. During the minute (negative) cycle, electrical flow flows from the Neutral final together with capacitor C1 is charged through diodes D2 together with D4.

When powered from a high voltage DC source, the polarity of the connectedness is non critical equally far equally the performance of the ability furnish is concerned. If the positive connectedness is made to the Line terminal, C1 is charged through diodes D1 together with D3. If the positive connectedness is made to the Neutral terminal, together with thence C1 is charged through diodes D2 together with D4.
An of import bill of caution to insert hither is well-nigh the protective fusing of the ability supply. Internally most ability supplies bring a fast acting air-conditioning rated fuse inwards serial amongst the Line terminal. It is recommended that a DC rated fuse last installed external to the ability supply. If 1 side of the high voltage DC osculation is connected to ground, together with thence the fuse is unremarkably positioned inwards serial amongst the “hot” side (the ungrounded side). It is recommended that you lot consult amongst your local security engineer to last sure.

Info!! Isolated & Non-Isolated Dc-Dc Converters

There are 2 oftentimes used price for types of DC-DC converters; non-isolated as well as isolated. This “isolation” refers to the being of an electrical barrier betwixt the input as well as output of the DC-DC converter.

The simplest example of a non isolated “converter” is the pop LM317 iii concluding linear regulator. One concluding for unregulated input, i for the regulated output as well as i for the common.

There are 2 oftentimes used price for types of DC INFO!! Isolated & Non-Isolated DC-DC ConvertersSource National Semiconductor

Note in that place is no isolation betwixt the input as well as output.

Today, non-isolated switching regulators are real common, or Point of Load (POL) converters.

Although depression toll as well as simple, these converters endure from i disadvantage inward that in that place is an electrical connexion betwixt the input as well as output. Many security way bodies and/or customers demand a separation from the applied input voltage as well as the output voltage which is often user accessible.

An isolated DC-DC converter volition convey a high frequency transformer providing that barrier. This barrier tin ambit the sack withstand anything from a few hundred volts to several K volts, equally is required for medical application.

Influenza A virus subtype H5N1 minute payoff of an isolated converter is that the output tin ambit the sack endure configured to endure either positive or negative.

Where many users operate confused concerns how to connect the input up, peculiarly amongst the differences betwixt a datacom organization (input negative connected to chassis) as well as a telecom organization (input positive connected to chassis).

Below are 4 scenarios, endure aware - figures 3 & 4 volition effect inward failed converters! Most DC-DC converters cannot withstand reversed input connections.

There are 2 oftentimes used price for types of DC INFO!! Isolated & Non-Isolated DC-DC Converters

Info!! Ce Rank Together With Dc-Dc Converters

The CE identification score is accepted across the entire European Community. It is an indication that the production to which it is applied to conforms amongst the minimum requirements of all the applicable European Directives for that product, too that duly authorized assessment procedures (technical files) cause got been carried out on that product.

The nearly mutual ability provide Directive is the Low Voltage Directive (LVD), EC release 73/23/EEC, which came into forcefulness inward 1973. This applies to all electrical equipment amongst an air-conditioning input voltage of betwixt l too one thousand V for alternating electrical flow too betwixt 75 too 1500 V for at 1 time current.

Many DC-DC board mountain converters are thus exempt from this directive if they cause got a nominal input voltage of 5VDC, 12VDC or 24VDC provided the input arrive at is non 75VDC or higher.

Most 48V input DC-DC converters cause got a DC input arrive at of 36V to 75VDC too and then autumn nether the Directive. four : 1 input arrive at models (18 - 75VDC) would likewise hold out covered.

Influenza A virus subtype H5N1 link to the LVD tin hold out institute hither http://ec.europa.eu/enterprise/electr_equipment/lv/index.htm


Update:  The CE score at nowadays covers RoHS2, too then the mark volition apply to lower input voltage converters

Saturday, 15 December 2018

Info!! Applications Of Dc-Dc Converters For Base Of Operations Station Rf Ability Amplifiers

When a DC-DC converter is inwards proximity to the Power Amplifier (PA) inwards an RF transmitter, regardless of whether it is located at the peak or at the base of operations of the antenna tower, the switching activeness of the converter is a potential beginning of RF interference. Many features of TDK-Lambda’s PAH450S serial of powerfulness modules provide safeguards against this. For example, the sealed casting of this module effectively acts equally a containment shield for radiated EMI generated past times the converter that could hold out sensed as well as amplified past times the RF PA. Conducted EMI is besides a concern, amongst the main sources existence conducted EMI from the converter input dorsum onto the render bus, as well as voltage ripple on the converter’s output existence coupled into the PA.


To suppress conducted EMI, RF Power Amplifier customers by as well as large blueprint their ain input filters. Guidelines for conducted emissions standards by as well as large halt at xxx MHz, piece the typical frequency make for the PAs is betwixt 800 MHz to two GHz. Therefore, these standards are mainly directed at guarding against potential interference amongst other RF equipment sharing the PA’s powerfulness bus. This precaution tin hold out compared to alert pacemaker patients well-nigh staying away from microwave ovens; the conduct chances may hold out slight, but the consequences tin hold out drastic.

The compact size (half brick) of TDK-Lambda’s PAH450S dc-dc converter provides a high powerfulness density suitable for driving analog PAs inwards integrated modules for base-station applications.

Regarding external interference, equally good equally the potential interference from the converter’s output voltage ripple, piece full general guidelines are applied to forestall RF interference, this conduct chances is besides minimized past times the fact that the RF as well as powerfulness converter frequency domains are significantly different. Therefore, amongst careful blueprint practices, RF interference from the converter is non a major concern, though equally converter’s switching frequencies growth it may cash inwards one's chips a pregnant blueprint issue.

In addition, thermal issues stand upwards for a pregnant challenge inwards the blueprint of transmitters, peculiarly inwards a combined PA/converter module. In configurations where the converter as well as the RF PA are co-packaged equally a unmarried module as well as installed at the peak of the tower (alternative configurations proceed the consummate RF transmit phase at the base of operations of the tower), fifty-fifty minor gains inwards efficiency tin accept tremendous performance advantages.

For example, an improvement inwards converter efficiency from 90% to 92% tin Pb to full estrus reductions of upwards to 20% inwards the combined module. The less estrus produced past times the converter, the to a greater extent than RF output powerfulness that tin hold out generated past times Power Amplifier, which is unremarkably the driving parameter for the transmit path.

Packaged inwards a criterion half-brick case, these DC-DC converters are available amongst 28V or 48V outputs, as well as achieve efficiencies upwards to 92%. Digital powerfulness command mightiness look to concur the potential to innovate farther single-digit percentages inwards gained efficiency. However, our customer’s nation us, to emulate the equivalent performance of an analog command loop operating at 1MHz (for example), the clocking frequency of a digital controller would accept to hold out significantly higher, which could as well as then hasten the arrival of higher RF interferences amongst the RF PA inwards time to come systems.

Other advances, mainly inwards RF powerfulness device technologies such equally SiC as well as GaN semiconductors, volition accept a greater send on on the overall efficiency of transmitters than digital powerfulness control. For now, converters amongst analog command such equally the PAH450S serial stand upwards for a corporation pick for powering analog PAs.

Power supplies needed for the PAs of next-generation base of operations station applications are besides faced amongst several other requirements. These include the powerfulness to withstand extreme ambient temperature swings, compact size, as well as a broad output adjustment make to permit the user to optimize the amplifier’s performance. TDK-Lambda’s PAH450S serial of 450 westward dc-dc converter modules are designed to run across these demands. For example, many jail cellular telephone repeaters are configured equally iii dissever single-pole antennas, each two ft to 3 ft tall, mounted inwards a triangular configuration on a 200 ft to 300 ft tower. Each pole typically has a dissever RF PA as well as dc-dc converter. H5N1 powerfulness double-decker is routed upwards the tower, as well as the broad input make spanned past times the 48V version of the converter (36V to 76Vdc) is highly tolerant of the voltage drib that tin come about along the length of the powerfulness bus, which tin make from 6V to 7Vdc.



Info!! Ability Provide Filter Capacitor Values Tin Modify Amongst The Applied Voltage


I read an article inwards 1 of the publications nosotros advertise inwards lately where an Engineer had designed a timing circuit, simply when he tested it, the frequency was likewise high.  He rechecked his calculations together with institute out from the capacitor datasheet that the value of the detail multilayer ceramic capacitor he had chosen, changes amongst the applied voltage.

I did non pay much attending to it, beingness to a greater extent than involved amongst ability supplies, until I was talking amongst 1 of our TDK-Lambda Engineers regarding non isolated POL (Point of Load) converters, together with he gave me the same alert almost the value alternative of the filter capacitors.  This is covered inwards the ceramic capacitor datasheets nether DC Bias characteristics.

POL converters rely on quite large ceramic capacitors on the input together with output to cut down the final result of the fast transient currents drawn past times FPGAs, (which tin drive the output voltage to deviate), amongst values sometimes approaching 2,000uF.

The job organization our Engineer had was that our customers mightiness non know almost this.  Intrigued I decided to investigate.  Below is the DC-Bias Characteristic for a 22uF 16V multilayer ceramic capacitor.



If a capacitor value of 22uF was recommended past times the application banking concern annotation for filtering the 12V input voltage on a non-isolated converter together with the user picked this detail part, inwards actuality, the existent capacitance would hold upwardly closer to 12uF.

Upon testing the filtering, the user mightiness complain that the application banking concern annotation was incorrect, whereas inwards fact the capacitor datasheet had non been interpreted correctly.

Something to acquit inwards mind!
 
Power Guy

Friday, 14 December 2018

Info!! Comparison Dc-Dc Converter’S Usable Power


Power render manufacturers rarely purpose the term “usable power” inwards their AC-DC production literature, but it is used oftentimes when referring to a DC-DC converter’s functioning against temperature. Is it simply a fancy reference to a de-rating curve? As usual, earlier nosotros answer that question, nosotros ask to facial expression a lilliputian deeper.

An AC-DC ability supply, similar the TDK-Lambda’s LS50 series, has a de-rating “curve” equally shown below. It tin attain notice deliver amount ability at 50C ambient too it de-rates linearly to 70% charge at 70C. (The knee articulation points of the nautical chart vary from production to production but non usually dramatically betwixt competitors of similar products.)





The nautical chart is real unproblematic because the LS50 does non require whatever forced air, too has a metallic illustration that is used equally a oestrus sink and to provide a score of physical protection.

Looking at TDK-Lambda’s iQG ¼ brick DC-DC converter, nosotros tin attain notice meet a much to a greater extent than complex laid of de-rating curves.




To hold out fair, the manufacture criterion ¼ brick has migrated from a production where 50W output ability was leading edge, to products that are fast approaching 1000W. The emphasis for DC-DC converters has been lay on bundle size. Even when fitted amongst an integral baseplate, similar TDK-Lambda’s iQG ¼ brick (shown below), the iQG’s book is 1.6 cubic inches, compared to the LS50’s 21 cubic inches. That is 10 times the output ability inwards less than a 1/10th of the volume.






The “brick” vogue DC-DC converters are designed to hold out either conduction cooled (to a mutual depression temperature plate), or forced air cooled, often without an external oestrus sink. The charge per unit of measurement of airflow available volition depend on the user’s application, too and then a lay out of functioning curves are provided. It tin attain notice hold out noticed that inwards to a greater extent than or less cases for depression airflow conditions, de-rating has already occurred already at 30C ambient.

Usable ability actually refers to the gradient too initiatory off indicate of the de-rating curve. Often Engineers volition focus on the output electrical flow of the converter, too select a higher power, to a greater extent than expensive product, expecting to significantly amend performance. This is where “usable power” comes into play.

Below is a simplified couplet of curves for 2m/s airflow. The blueish employment is for a 12V 67A (800W) DC-DC converter, too the greenish employment for the TDK-Lambda 12V 42A (500W) converter. The 800W model is 1.6 times to a greater extent than powerful at depression ambient temperatures, but inwards the xanthous expanse at higher ambient the ratio drops to 1.35 times at 70C too 1.24 times at 75C. (Typically customers move DC-DC converters inwards the 65 to 80C range.)


Although the 800W converter has to a greater extent than available power, the 500W unit of measurement has to a greater extent than usable power, demonstrated past times a much less steep de-rating curve. It tin attain notice hold out seen that at higher ambient temperatures, it would hold out to a greater extent than terms effective to purpose the 500W converter.

Info!! An Choice To Isolated Dc-Dc Converters

Traditionally when several voltages (5V to 24V) are required inwards a system, either a multiple output ability provide is used or a unmarried output “bulk” provide alongside isolated DC-DC converters.  For voltages lower than 5V (0.6 to 3.3V) the electronics manufacture has migrated to using multiple non-isolated DC-DC converters, oft referred to Point of Load or POLs to drive FPGAs powered from a double-decker voltage betwixt 5V to 12V.
With depression ability (typically less than 300W) dual, triple or quad requirements inwards the criterion voltages of 5V, 12V, 15V in addition to 24V, a unmarried AC-DC ability provide is used.  These are toll effective in addition to readily available.
For medium ability requirements (350W to 1500W), oft the selection is to move a modular ability provide similar TDK-Lambda’s NV, Vega or Alpha series.  As the term “modular” implies, they are seat together using pre-assembled modules in addition to are available alongside brusk lead-times.  All the outputs are conveniently seat into ane package.


TDK-Lambda’s Vega series

Another selection is to move a unmarried output AC-DC ability provide alongside board mountain isolated DC-DC converters to create additional outputs.  These readily available converters attain from some 10W to 60W, tin convey input voltages of 12V, 24V or 48V in addition to provide single, dual or triple outputs, alongside output voltages of 3.3V, 5V, 12V in addition to 15V.


TDK-Lambda’s CCG serial of 25mm x 25mm 30W isolated DC-DC converters

When the requirement is for a higher ability (100W or greater) second, 3rd or 4th output, the DC-DC converter selection becomes to a greater extent than express in addition to because of the ability involved, estrus dissipation is harder to manage.  Cost tin every bit good top an issue.  Utilizing technology developed from the depression voltage output Point of Load non-isolated converters, higher output voltage non-isolated converters are forthwith existence considered.
Without the constraints of input to output isolation, high surgery “buck” (step-down) converters alongside real high efficiencies tin move achieved.  With less waste matter heat, bundle sizes tin move minimized in addition to costs reduced.
TDK-Lambda’s i6A24014A033V, for illustration has the next specifications:


Input voltage:    +9 to 40Vdc
Output range:    +3.3 to 24Vdc
Output power:   Up to 250W
Output current:  Up to 14A
Efficiency:         Up to 98%
Package size:     33mm x 23mm



As a note, these types of (step-down) buck converters cannot provide a voltage higher than the input.


Although these types of converters take away maintain no input to output isolation, the AC-DC ability provide volition have, inwards accordance alongside the security standards IEC 60950 / 60601.
Below is a typical application using the i6A:



Power Guy

Info!! Synchronizing The I6a Dc-Dc Converter Switching Frequencies

When multiple DC to DC converters are used to mightiness sensitive circuitry, input as well as output vibrations tin effort organisation issues, especially when mensuration real depression indicate voltages.  The work is compounded if the converters’ switching frequencies vary alongside input voltage or output load. 

Even when the converter’s operating frequency is fixed, in that place volition hold upward a tolerance on the switching frequency timing circuit betwixt the converters as well as but a few Hertz differences betwixt the converters tin effort sub-harmonic vanquish frequencies.

Filtering the inputs as well as outputs is 1 solution, but this tin hold upward complex over a broad frequency bandwidth.  If the DC-DC converters had a fixed switching frequency as well as could hold upward synchronized to together or tied to a main clock, whatever board and/or organisation EMI filtering would hold upward simpler.

Although somewhat uncommon, in that place are about DC-DC converters that accept synchronization capability.  When the “full feature” selection is specified on TDK-Lambda’s depression cost, fixed frequency, i6A serial of 250W non-isolated DC-DC converters, multiple units tin accept their operating frequency synchronized.

There are iv ways to connect the modules:

1. Master / Slave, alongside no stage shift.  One i6A module is the “master” as well as the other modules volition function at the master’s switching frequency.  All the modules depict input electrical current at the same time.

 


2. Master / Slave, alongside 180 score stage shift.  One i6A module is the “master” as well as other modules volition function at the master’s switching frequency, but straight out of phase.  This tin trim back the peak input ripple electrical current from the supply, requiring less input capacitance.  Any module alongside a jumper betwixt pins 4 as well as 33 volition accept the stage shift business office activated.
 

3. An external clock is used alongside no stage shift.  All the i6A modules function at the same frequency every bit the external clock (no main / slave). All the modules depict input electrical current at the same time.
 
4. An external clock is used alongside a 180 degrees stage shift.  All the i6A modules function at the same frequency every bit the external clock (no main / slave), but whatever module alongside a jumper betwixt pins 4 as well as 33 volition accept the stage shift business office activated.  This 1 time again reduces the peak input ripple electrical current from the supply, requiring less input capacitance.

 

The i6A non-isolated DC-DC converters are a serial of measure downward converters (the input voltage has to hold upward higher than the output) inward the manufacture criterion 1/16th brick footprint.  All models characteristic broad hit input voltages, every bit high every bit ix to 53V as well as accept broad hit output adjustment from 3.3 – 15V to 3.3 – 40V.  Operating efficiencies tin hold upward every bit high every bit 98%.

Info!! Tin Forcefulness Out A Dual Output Dc-Dc Converter Supply A Unmarried Output?



Yes, many dual output DC-DC converters tin genuinely survive used to provide a higher voltage, unmarried output.
Figure 1 shows a simplified block diagram of the TDK-Lambda’s CCG +/-12V dual output converter.  Two transformer secondary windings are rectified in addition to filtered to provide ii 12Vdc voltages in addition to are connected together, effectively inwards series.  Internally the 0V of the upper circuit is connected to the +12V of the lower circuit in addition to this betoken is supplied to the user every bit the 0V or mutual connection.  This provides a +12V in addition to a -12V output to the user.



Figure 1: Influenza A virus subtype H5N1 dual output DC-DC converter providing a +/-12V output


If a unmarried 24V output voltage is needed, a dual output converter tin survive used every bit shown inwards Figure 2.




Figure 2: Influenza A virus subtype H5N1 dual output DC-DC converter providing a 24V output


Internally cipher has changed, at that spot are however ii 12Vdc voltages connected inwards series.  If the mutual final is non connected to the user’s circuit, the converter tin at in 1 lawsuit provide a 24V unmarried output.
Note the maximum available output electrical current remains the same every bit the maximum output electrical current of the dual output converter.  For event the 30W CCG30-24-12D is rated at +/-12V +/-1.25A, important it is capable of supplying +12V at 1.25A in addition to -12V at 1.25A or if connected every bit a unmarried output, 24V at 1.25A (30W).


Likewise a dual output +/-15V converter tin survive configured to render 30V.
Always confirm amongst the manufacturer if their datasheet does non soil it tin survive used every bit a unmarried output.


Power Guy

Info!! Types Of Distributed Ability Architectures

Compact DC-DC converters cause got made their way into millions of electronic products as well as systems. The vast bulk of these depend upon an air-conditioning front-end-box to convert the air-conditioning ability beginning into a DC voltage from which the converters operate. In addition, international regulations cause got mandated that these front-end-boxes include Power Factor & Harmonic Correction (PFHC) to maximize the available ability from the ability grid.

Traditional Distributed Power Solutions

Traditional designs that employ distributed ability architecture house DC-DC converters on PC boards really about the point-of-load to maximize arrangement speeds as well as efficiencies. To ability the DC-DC converters, the required AC-DC ability render alongside PFHC is typically mounted somewhere inwards the system’s enclosure, external to the primary pc-board (Figure 1).

DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures

This technique is quite reasonable for nearly applications. However, when it comes to equipment that must hold out mounted outdoors as well as occupy the smallest possible volume, at that spot are straightaway improved ability products available.

Improved Power Distribution Methods

Typical medium ability (400-700 watts) PCB mounted DC-DC converters are packaged inwards “full brick” sizes (e.g., 2.4” west x 4.6” L x 0.5” H). Influenza A virus subtype H5N1 give away of major manufacturers of DC-DC converters cause got seen the involve for, as well as are straightaway providing air-conditioning input PFHC front end ends inwards brick-formats that are PCB mountable close to the DC-DC converter(s). This has the payoff of placing all the ability components on the same pc-board thence reducing the terminate products size as well as eliminating the ability interconnect wires (Figure 2).

DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures
These AC-DC w/PFHC front-end bricks require some external components (capacitors, resistors, etc.), but the infinite required for these items is modest inwards comparing to the elimination of the external “metal boxed air-conditioning front end end”. And, these external components tin hold out robotically inserted during the production of the pc-board. An added produce goodness of utilizing these brick packages is that they tin hold out cooled without fans, past times agency of rut sinks or mutual frigidness plates (e.g., mounting the brick bases against the system’s metallic enclosure).

The Latest AC-DC Power “Brick” Solutions

Power Supply manufacturers cause got non stopped developing smaller as well as ameliorate ability solutions. In fact, inwards recent times the AC/PFHC brick mentioned higher upwards has been merged alongside a DC-DC converter to flat the ultimate ability solution; an AC/PFHC/DC integrated brick. These 2-in-1 devices cause got broad make 85 to 265 VAC inputs, right the ability factor, as well as provide the DC output(s) to the system. All this is accomplished inside the same size constraints of a unmarried “full brick” parcel criterion solely 2.4” west x 4.6” L x 0.5” H, thence providing a 50% board infinite savings (Figure 3).
DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures
These integrated 2-in-1 pcb-mounted Power Bricks are ideal for Distributed Power Architectures where POL (Point of Load) Converters are needed. Since the 2-in-1 Power Bricks provide the conversion from air-conditioning to DC (with PFHC) along alongside the needed isolation, as well as the Intermediate Bus Voltage, the role of multiple low-cost, non-isolated POL converters becomes quite practical (Figure 4).
DC converters cause got made their way into millions of electronic products as well as systems INFO!! Types of Distributed Power Architectures
Recent advances inwards components as well as ability pattern technologies cause got made these new
2-in-1 pcb-mount ability bricks possible. In gild to growth ability densities, exceptional Permalloy cores cause got been developed as well as employed inwards the inductors. New substrates as well as innovative transformer winding techniques cause got facilitated constituent acme compressions as well as improved thermal management. And, of course, advances inwards integrated as well as hybrid circuits cause got contributed greatly to this adjacent generation of ability products.

Applications of 2-in-1 AC-DC Power Bricks

These novel “2-in-1” AC-DC ability bricks are ideal for many outdoor as well as indoor applications including:
  • Custom Power Supplies
  • PCB Mounted Bulk Power for Multiple DC-DC or POL Converters
  • Large LED & Liquid Crystal Displays
  • Traffic Information, Control, & Signaling Equipment
  • Toll Devices
  • Pico & Cell Phone Repeaters
  • WiFi, Telecom Sub-Stations
  • Underwater Surveying Devices
  • Automatic Pass-Reading-Devices for FastTrac Car Lanes
  • Oil Pumping & Pipeline Monitoring Devices
  • Security Systems
New 2-in-1 AC-DC Power Bricks

Lambda, a unit of measurement of TDK Corp., is currently i of the manufacturers of a novel make of integrated “single-brick” AC-DC ability bricks. These “2-in-1” pcb-mount devices are as well as so innovative, they cause got 7 patents pending.

Some of the salient features of Lambda’s single-brick AC-DC PFE Series ability modules include:
  • Operates from Universal 85 to 265VAC, 47-63Hz Input
  • Power Factor & Harmonic Correction Meets EN61000-3-2
  • Low Profile, Single-Brick Footprint
  • High Power Density (up to 129W/in3) & Efficiency (up to 90%)
  • Regulated as well as Isolated DC Outputs alongside Wide Operating Temperatures (at baseplate)
  • PFE500-12: 12VDC Output, 400 Watts, -40 to +85°C
  • PFE500-28: 24 to 28VDC Output, 500 Watts, -40 to +100°C
  • PFE500-48: 48VDC Output, 500 Watts, -40 to +100°C
  • PFE700-48: 51VDC Output (semi-regulated), 714 Watts, -40 to +85°C
  • ±20% Output Voltage Adjustment Range
  • Over Voltage/Current/Temperature Protection
  • Approved to UL/CSA/EN60950-1, CE Marked, & RoHS Compliant
  • Optional Heatsinks & Evaluation Kits Available

Info!! Tin One Run My Ac-Dc Ability Provide Amongst A Dc Input?

The answer is yes, sometimes.

Many criterion AC-DC switch fashion ability supplies (most of Lambda’s products) specify a high voltage DC input make inwards add-on to the to a greater extent than mutual air-conditioning input make of 90-264VAC. We have many questions well-nigh how together with where to connect the DC input to an AC-DC furnish that is spec’d to travel off of DC likewise equally an air-conditioning inputs.

Where together with why is high voltage DC ability used? It turns out that many ability generation facilities provide a high voltage DC to ability the plant’s equipment rather than the regular 115VAC or 208VAC ability grid. This high voltage DC (typically 120 or 130-330VDC) tin last easily used amongst batteries to provide a secure root of ability rather than using expensive centralized or local UPS systems.

Now dorsum to the subject. The topology of many switch-mode ability supplies genuinely lends itself to performance from either air-conditioning or DC input. Important Note: Always banking concern jibe your ability supply’s Operations Manual or spec canvass to confirm that it is designed to travel from either an air-conditioning or DC input.

Referring to the simplified ability furnish schematic below:

 specify a high voltage DC input make inwards add-on to the to a greater extent than mutual air-conditioning input make of  INFO!! Can I Operate my AC-DC Power Supply amongst a DC Input?
When powered yesteryear an air-conditioning sine wave, during the showtime one-half bike the electrical flow flows from the Line final through the input filter together with charges capacitor C1 through diodes D1 together with D3. During the minute (negative) cycle, electrical flow flows from the Neutral final together with capacitor C1 is charged through diodes D2 together with D4.

When powered from a high voltage DC source, the polarity of the connectedness is non critical equally far equally the performance of the ability furnish is concerned. If the positive connectedness is made to the Line terminal, C1 is charged through diodes D1 together with D3. If the positive connectedness is made to the Neutral terminal, together with thence C1 is charged through diodes D2 together with D4.
An of import bill of caution to insert hither is well-nigh the protective fusing of the ability supply. Internally most ability supplies bring a fast acting air-conditioning rated fuse inwards serial amongst the Line terminal. It is recommended that a DC rated fuse last installed external to the ability supply. If 1 side of the high voltage DC osculation is connected to ground, together with thence the fuse is unremarkably positioned inwards serial amongst the “hot” side (the ungrounded side). It is recommended that you lot consult amongst your local security engineer to last sure.

Info!! Isolated & Non-Isolated Dc-Dc Converters

There are 2 oftentimes used price for types of DC-DC converters; non-isolated as well as isolated. This “isolation” refers to the being of an electrical barrier betwixt the input as well as output of the DC-DC converter.

The simplest example of a non isolated “converter” is the pop LM317 iii concluding linear regulator. One concluding for unregulated input, i for the regulated output as well as i for the common.

There are 2 oftentimes used price for types of DC INFO!! Isolated & Non-Isolated DC-DC ConvertersSource National Semiconductor

Note in that place is no isolation betwixt the input as well as output.

Today, non-isolated switching regulators are real common, or Point of Load (POL) converters.

Although depression toll as well as simple, these converters endure from i disadvantage inward that in that place is an electrical connexion betwixt the input as well as output. Many security way bodies and/or customers demand a separation from the applied input voltage as well as the output voltage which is often user accessible.

An isolated DC-DC converter volition convey a high frequency transformer providing that barrier. This barrier tin ambit the sack withstand anything from a few hundred volts to several K volts, equally is required for medical application.

Influenza A virus subtype H5N1 minute payoff of an isolated converter is that the output tin ambit the sack endure configured to endure either positive or negative.

Where many users operate confused concerns how to connect the input up, peculiarly amongst the differences betwixt a datacom organization (input negative connected to chassis) as well as a telecom organization (input positive connected to chassis).

Below are 4 scenarios, endure aware - figures 3 & 4 volition effect inward failed converters! Most DC-DC converters cannot withstand reversed input connections.

There are 2 oftentimes used price for types of DC INFO!! Isolated & Non-Isolated DC-DC Converters

Info!! Ce Rank Together With Dc-Dc Converters

The CE identification score is accepted across the entire European Community. It is an indication that the production to which it is applied to conforms amongst the minimum requirements of all the applicable European Directives for that product, too that duly authorized assessment procedures (technical files) cause got been carried out on that product.

The nearly mutual ability provide Directive is the Low Voltage Directive (LVD), EC release 73/23/EEC, which came into forcefulness inward 1973. This applies to all electrical equipment amongst an air-conditioning input voltage of betwixt l too one thousand V for alternating electrical flow too betwixt 75 too 1500 V for at 1 time current.

Many DC-DC board mountain converters are thus exempt from this directive if they cause got a nominal input voltage of 5VDC, 12VDC or 24VDC provided the input arrive at is non 75VDC or higher.

Most 48V input DC-DC converters cause got a DC input arrive at of 36V to 75VDC too and then autumn nether the Directive. four : 1 input arrive at models (18 - 75VDC) would likewise hold out covered.

Influenza A virus subtype H5N1 link to the LVD tin hold out institute hither http://ec.europa.eu/enterprise/electr_equipment/lv/index.htm


Update:  The CE score at nowadays covers RoHS2, too then the mark volition apply to lower input voltage converters

Thursday, 13 December 2018

Info!! Applications Of Dc-Dc Converters For Base Of Operations Station Rf Ability Amplifiers

When a DC-DC converter is inwards proximity to the Power Amplifier (PA) inwards an RF transmitter, regardless of whether it is located at the peak or at the base of operations of the antenna tower, the switching activeness of the converter is a potential beginning of RF interference. Many features of TDK-Lambda’s PAH450S serial of powerfulness modules provide safeguards against this. For example, the sealed casting of this module effectively acts equally a containment shield for radiated EMI generated past times the converter that could hold out sensed as well as amplified past times the RF PA. Conducted EMI is besides a concern, amongst the main sources existence conducted EMI from the converter input dorsum onto the render bus, as well as voltage ripple on the converter’s output existence coupled into the PA.


To suppress conducted EMI, RF Power Amplifier customers by as well as large blueprint their ain input filters. Guidelines for conducted emissions standards by as well as large halt at xxx MHz, piece the typical frequency make for the PAs is betwixt 800 MHz to two GHz. Therefore, these standards are mainly directed at guarding against potential interference amongst other RF equipment sharing the PA’s powerfulness bus. This precaution tin hold out compared to alert pacemaker patients well-nigh staying away from microwave ovens; the conduct chances may hold out slight, but the consequences tin hold out drastic.

The compact size (half brick) of TDK-Lambda’s PAH450S dc-dc converter provides a high powerfulness density suitable for driving analog PAs inwards integrated modules for base-station applications.

Regarding external interference, equally good equally the potential interference from the converter’s output voltage ripple, piece full general guidelines are applied to forestall RF interference, this conduct chances is besides minimized past times the fact that the RF as well as powerfulness converter frequency domains are significantly different. Therefore, amongst careful blueprint practices, RF interference from the converter is non a major concern, though equally converter’s switching frequencies growth it may cash inwards one's chips a pregnant blueprint issue.

In addition, thermal issues stand upwards for a pregnant challenge inwards the blueprint of transmitters, peculiarly inwards a combined PA/converter module. In configurations where the converter as well as the RF PA are co-packaged equally a unmarried module as well as installed at the peak of the tower (alternative configurations proceed the consummate RF transmit phase at the base of operations of the tower), fifty-fifty minor gains inwards efficiency tin accept tremendous performance advantages.

For example, an improvement inwards converter efficiency from 90% to 92% tin Pb to full estrus reductions of upwards to 20% inwards the combined module. The less estrus produced past times the converter, the to a greater extent than RF output powerfulness that tin hold out generated past times Power Amplifier, which is unremarkably the driving parameter for the transmit path.

Packaged inwards a criterion half-brick case, these DC-DC converters are available amongst 28V or 48V outputs, as well as achieve efficiencies upwards to 92%. Digital powerfulness command mightiness look to concur the potential to innovate farther single-digit percentages inwards gained efficiency. However, our customer’s nation us, to emulate the equivalent performance of an analog command loop operating at 1MHz (for example), the clocking frequency of a digital controller would accept to hold out significantly higher, which could as well as then hasten the arrival of higher RF interferences amongst the RF PA inwards time to come systems.

Other advances, mainly inwards RF powerfulness device technologies such equally SiC as well as GaN semiconductors, volition accept a greater send on on the overall efficiency of transmitters than digital powerfulness control. For now, converters amongst analog command such equally the PAH450S serial stand upwards for a corporation pick for powering analog PAs.

Power supplies needed for the PAs of next-generation base of operations station applications are besides faced amongst several other requirements. These include the powerfulness to withstand extreme ambient temperature swings, compact size, as well as a broad output adjustment make to permit the user to optimize the amplifier’s performance. TDK-Lambda’s PAH450S serial of 450 westward dc-dc converter modules are designed to run across these demands. For example, many jail cellular telephone repeaters are configured equally iii dissever single-pole antennas, each two ft to 3 ft tall, mounted inwards a triangular configuration on a 200 ft to 300 ft tower. Each pole typically has a dissever RF PA as well as dc-dc converter. H5N1 powerfulness double-decker is routed upwards the tower, as well as the broad input make spanned past times the 48V version of the converter (36V to 76Vdc) is highly tolerant of the voltage drib that tin come about along the length of the powerfulness bus, which tin make from 6V to 7Vdc.



Info!! Ability Provide Filter Capacitor Values Tin Modify Amongst The Applied Voltage


I read an article inwards 1 of the publications nosotros advertise inwards lately where an Engineer had designed a timing circuit, simply when he tested it, the frequency was likewise high.  He rechecked his calculations together with institute out from the capacitor datasheet that the value of the detail multilayer ceramic capacitor he had chosen, changes amongst the applied voltage.

I did non pay much attending to it, beingness to a greater extent than involved amongst ability supplies, until I was talking amongst 1 of our TDK-Lambda Engineers regarding non isolated POL (Point of Load) converters, together with he gave me the same alert almost the value alternative of the filter capacitors.  This is covered inwards the ceramic capacitor datasheets nether DC Bias characteristics.

POL converters rely on quite large ceramic capacitors on the input together with output to cut down the final result of the fast transient currents drawn past times FPGAs, (which tin drive the output voltage to deviate), amongst values sometimes approaching 2,000uF.

The job organization our Engineer had was that our customers mightiness non know almost this.  Intrigued I decided to investigate.  Below is the DC-Bias Characteristic for a 22uF 16V multilayer ceramic capacitor.



If a capacitor value of 22uF was recommended past times the application banking concern annotation for filtering the 12V input voltage on a non-isolated converter together with the user picked this detail part, inwards actuality, the existent capacitance would hold upwardly closer to 12uF.

Upon testing the filtering, the user mightiness complain that the application banking concern annotation was incorrect, whereas inwards fact the capacitor datasheet had non been interpreted correctly.

Something to acquit inwards mind!
 
Power Guy

Info!! Comparison Dc-Dc Converter’S Usable Power


Power render manufacturers rarely purpose the term “usable power” inwards their AC-DC production literature, but it is used oftentimes when referring to a DC-DC converter’s functioning against temperature. Is it simply a fancy reference to a de-rating curve? As usual, earlier nosotros answer that question, nosotros ask to facial expression a lilliputian deeper.

An AC-DC ability supply, similar the TDK-Lambda’s LS50 series, has a de-rating “curve” equally shown below. It tin attain notice deliver amount ability at 50C ambient too it de-rates linearly to 70% charge at 70C. (The knee articulation points of the nautical chart vary from production to production but non usually dramatically betwixt competitors of similar products.)





The nautical chart is real unproblematic because the LS50 does non require whatever forced air, too has a metallic illustration that is used equally a oestrus sink and to provide a score of physical protection.

Looking at TDK-Lambda’s iQG ¼ brick DC-DC converter, nosotros tin attain notice meet a much to a greater extent than complex laid of de-rating curves.




To hold out fair, the manufacture criterion ¼ brick has migrated from a production where 50W output ability was leading edge, to products that are fast approaching 1000W. The emphasis for DC-DC converters has been lay on bundle size. Even when fitted amongst an integral baseplate, similar TDK-Lambda’s iQG ¼ brick (shown below), the iQG’s book is 1.6 cubic inches, compared to the LS50’s 21 cubic inches. That is 10 times the output ability inwards less than a 1/10th of the volume.






The “brick” vogue DC-DC converters are designed to hold out either conduction cooled (to a mutual depression temperature plate), or forced air cooled, often without an external oestrus sink. The charge per unit of measurement of airflow available volition depend on the user’s application, too and then a lay out of functioning curves are provided. It tin attain notice hold out noticed that inwards to a greater extent than or less cases for depression airflow conditions, de-rating has already occurred already at 30C ambient.

Usable ability actually refers to the gradient too initiatory off indicate of the de-rating curve. Often Engineers volition focus on the output electrical flow of the converter, too select a higher power, to a greater extent than expensive product, expecting to significantly amend performance. This is where “usable power” comes into play.

Below is a simplified couplet of curves for 2m/s airflow. The blueish employment is for a 12V 67A (800W) DC-DC converter, too the greenish employment for the TDK-Lambda 12V 42A (500W) converter. The 800W model is 1.6 times to a greater extent than powerful at depression ambient temperatures, but inwards the xanthous expanse at higher ambient the ratio drops to 1.35 times at 70C too 1.24 times at 75C. (Typically customers move DC-DC converters inwards the 65 to 80C range.)


Although the 800W converter has to a greater extent than available power, the 500W unit of measurement has to a greater extent than usable power, demonstrated past times a much less steep de-rating curve. It tin attain notice hold out seen that at higher ambient temperatures, it would hold out to a greater extent than terms effective to purpose the 500W converter.

Info!! An Choice To Isolated Dc-Dc Converters

Traditionally when several voltages (5V to 24V) are required inwards a system, either a multiple output ability provide is used or a unmarried output “bulk” provide alongside isolated DC-DC converters.  For voltages lower than 5V (0.6 to 3.3V) the electronics manufacture has migrated to using multiple non-isolated DC-DC converters, oft referred to Point of Load or POLs to drive FPGAs powered from a double-decker voltage betwixt 5V to 12V.
With depression ability (typically less than 300W) dual, triple or quad requirements inwards the criterion voltages of 5V, 12V, 15V in addition to 24V, a unmarried AC-DC ability provide is used.  These are toll effective in addition to readily available.
For medium ability requirements (350W to 1500W), oft the selection is to move a modular ability provide similar TDK-Lambda’s NV, Vega or Alpha series.  As the term “modular” implies, they are seat together using pre-assembled modules in addition to are available alongside brusk lead-times.  All the outputs are conveniently seat into ane package.


TDK-Lambda’s Vega series

Another selection is to move a unmarried output AC-DC ability provide alongside board mountain isolated DC-DC converters to create additional outputs.  These readily available converters attain from some 10W to 60W, tin convey input voltages of 12V, 24V or 48V in addition to provide single, dual or triple outputs, alongside output voltages of 3.3V, 5V, 12V in addition to 15V.


TDK-Lambda’s CCG serial of 25mm x 25mm 30W isolated DC-DC converters

When the requirement is for a higher ability (100W or greater) second, 3rd or 4th output, the DC-DC converter selection becomes to a greater extent than express in addition to because of the ability involved, estrus dissipation is harder to manage.  Cost tin every bit good top an issue.  Utilizing technology developed from the depression voltage output Point of Load non-isolated converters, higher output voltage non-isolated converters are forthwith existence considered.
Without the constraints of input to output isolation, high surgery “buck” (step-down) converters alongside real high efficiencies tin move achieved.  With less waste matter heat, bundle sizes tin move minimized in addition to costs reduced.
TDK-Lambda’s i6A24014A033V, for illustration has the next specifications:


Input voltage:    +9 to 40Vdc
Output range:    +3.3 to 24Vdc
Output power:   Up to 250W
Output current:  Up to 14A
Efficiency:         Up to 98%
Package size:     33mm x 23mm



As a note, these types of (step-down) buck converters cannot provide a voltage higher than the input.


Although these types of converters take away maintain no input to output isolation, the AC-DC ability provide volition have, inwards accordance alongside the security standards IEC 60950 / 60601.
Below is a typical application using the i6A:



Power Guy